BBGLW - SILICONE LUBRICANT, PART NO. 82146
- MSDS: BBGLW
- Manufacturer: PERMATEX INDUSTRIAL
- Product Name: SILICONE LUBRICANT, PART NO. 82146
- National Stock Number: 6850-00F000368
Product Identification
Product ID:SILICONE LUBRICANT, PART NO. 82146
MSDS Date:01/01/1985
FSC:6850
NIIN:00F000368
MSDS Number: BBGLW
Responsible Party
Emergency Phone: 203/527-5211
Cage: 62377
Contractor
Telephone: 877-376-2839
Cage: 62377
Ingredients
PETROLEUM DISTILLATE
Fraction By Weight: 17%
ACGIH TLV: 500PPM
DIMETHYL POLYSILOXANE
Fraction By Weight: 5%
DISPERSAL AGENT
Fraction By Weight: 2-3%
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 10 - 23%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
Hazards
Effects of Overexposure:DIZZINESS, DROWSINESS. AT VERY HIGH
CONCENTRATIONS, IRRITATION OF EYES AND MUCOUS MEMBRANES.
First Aid
First Aid:INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
INHALATION: REMOVE TO FRESH AIR. SKIN: WASH WITH SOAP AND WATER.
EYES: FLUSH WITH PLENTY OF WATER. IF IRRITATION PERSISTS, GET
MEDICAL ATTENTI ON.
Fire Fighting
Flash Point:33F (BASE ONLY)
Extinguishing Media:WATER FOG, FOAM, CO2
Unusual Fire/Explosion Hazard:CANS MAY BURST AT HIGH TEMP; BURNS TO
GIVE STANDARD CO2,CO, AND SMALL AMOUNT OF SILICA
Accidental Release
Spill Release Procedures:AVOID SPARKS OR FLAME. VENTILATE. SOAK UP
LIQUID IN ANY INERT ABSORBENT.
Handling
Handling and Storage Precautions:STORE BELOW 120F. DO NOT USE NEAR
SPARKS OR FLAME. AVOID PROLONGED OR FREQUENT SKIN CONTACT.
Exposure Controls
Ventilation:MUST BE ADEQUATE TO AVOID EXCEEDING TLV.
Protective Gloves:NEOPRENE/PLASTI
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health
P.O. BOX 11915/ 705 N. MOUNTAIN ROAD, NEWINGTON, CONNECTICUT 06111.
Chemical Properties
Vapor Pres: 55
Spec Gravity:0.95
Solubility in Water:PARTIAL
Appearance and Odor:CLEAR SPRAY, SLIGHT, MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DO NOT INCINERATE CANS, USE LICENSED DISPOSAL
SERVICE. LANDFILL OR INCINERATE ABSORBED LIQUID SPILLAGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.